SEMiX? Dual IGBT Modules Dual IGBT Modules from Semikron in modern low-profile SEMiX? packages suitable for half-bridge power control applications. The modules use solder-free spring or press-fit contacts to allow for a gate driver mounted directly on top of the module, saving space and offering gr

Phase Angle Trigger Module, SKPC 200 series Provides the control signals for an ac load, half controlled B2HZ or a half controlled B2HK single-phase bridge e.g. SKCH 28/08. Integral transformer may be connected to a separate supply allowing the load circuit to operate on a lower voltage Output gate drive is short circuit protected Built in uncommitted op amp for closed loop control Screw terminals Input signal range 0-5Vd.c. Input threshold 0·3Vd.c. (typ.) Input signal/firing angle Linear Input impedance 100k min. Output trigger current 1·9A max. (each gate) Off-state dv/dt 5000VΩs min. Auxiliary output 5V @ 20mA Isolation 2500V r.m.s. Operating temperature 0 to +55°C Op-amp input voltage ±10·5V Standards UL 94-V0

SEMIPACK? SKKE Series Single Diode Modules Heavy-duty single diode modules in a variety of voltage and current ratings. These compact devices are suitable for high-current rectifier applications. Excellent heat transfer through aluminium oxide ceramic isolated metal baseplate Precious metal contacts for high reliability Approvals UL recognized E63532

IGBT, MODULE, 1.2KV, 167A, MINISKIIP-3, Transistor Polarity:Six N Channel, DC Collector Current:167A, Collector Emitter Saturation Voltage Vce(on):1.85V, Power Dissipation Pd:-, Collector Emitter Voltage V(br)ceo:1.2kV, No. of Pins:-, RoHS Compliant: Yes

SKYPER? 32 R & SKYPER? 32PRO R IGBT Module Adaptor Boards The Semikron Board 1 SKYPER? 32 R is an adaptor board for the IGBT driver module allowing customisation to suit the specific IGBT output module used. The switching characteristics of the IGBTs can be influenced through user selection of the appropriate RGon and RGoff components and it is also possible to adjust the monitoring level and blanking time for the Dynamic Short Circuit Protection function. The SKYPER? 32PRO R includes facilities for soft turn-off and an external error input. 122-0388 Board 1 SKYPER? 32 R is intended for use with driver module 687-5043 122-0389 Board 1 SKYPER? 32PRO R is intended for use with driver module 687-5049 ? Two output channels ? Failure management ? Collector-emitter voltage 1700V ? Peak output current 15A ? Dynamic short circuit protection

Stud Mounting Rectifier Diodes High current rectifier diodes from Semikron housed in standard stud-mounting cases. Due to the excellent thermal coupling between the device and heatsink stud mounting offers high reliability at high operating currents. With voltage ratings of up to 1700 V these diodes are suitable for most high power rectification applications. Both Stud Anode and Stud Cathode diode configurations are available. High voltage and current ratings Robust high-reliability hermetically sealed case Low thermal resistance between device and heatsink SKN types have the Anode connected to the stud body SKR types have the Cathode connected to the stud body

SKYPER? 12 Press-fit IGBT Driver Module The Semikron SKYPER? 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V. For suitable IGBT modules see 122-0385 to 122-0387 ? Fits to 1200V & 1700V IGBT modules ? Drives Econodual and SEMIX press-fit modules ? Two 1W output channels for half-bridge applications ? Up to 8 μC gate charge output capacity ? Qualified safe operating area ensures best possible performance ? High reliability with MTBF rate > 5 Million hours ? Short-circuit protected over the complete operating temperature range ? Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off ? Robust rectangle signal tra

Stud Mounting Rectifier Diodes High current rectifier diodes from Semikron housed in standard stud-mounting cases. Due to the excellent thermal coupling between the device and heatsink stud mounting offers high reliability at high operating currents. With voltage ratings of up to 1700 V these diodes are suitable for most high power rectification applications. Both Stud Anode and Stud Cathode diode configurations are available. High voltage and current ratings Robust high-reliability hermetically sealed case Low thermal resistance between device and heatsink SKN types have the Anode connected to the stud body SKR types have the Cathode connected to the stud body

SEMiX? Dual IGBT Modules Dual IGBT Modules from Semikron in modern low-profile SEMiX? packages suitable for half-bridge power control applications. The modules use solder-free spring or press-fit contacts to allow for a gate driver mounted directly on top of the module, saving space and offering gr

SKYPER Prime Dual IGBT Driver Module The Semikron SKYPER Prime driver module provides the interface between a controller and suitable Primepack or Semitrans 10 IGBT modules. The dual channel SKYPER Prime module can drive IGBTs with ratings of up to 1400 A and 1700V. ? Dual driver module for Primepack or Semitrans 10 IGBT modules ? Simple parallel operation of up to 3 modules with board-to-board connection ? Digital sensor signal output (PWM) allows direct μC connection without adapter boards ? Galvanically isolated DC link and temperature measurement ? Dynamic short circuit detection with SoftOff feature ? ROHS compliant, UL recognized

Stud Mounting Rectifier Diodes High current rectifier diodes from Semikron housed in standard stud-mounting cases. Due to the excellent thermal coupling between the device and heatsink stud mounting offers high reliability at high operating currents. With voltage ratings of up to 1700 V these diodes are suitable for most high power rectification applications. Both Stud Anode and Stud Cathode diode configurations are available. High voltage and current ratings Robust high-reliability hermetically sealed case Low thermal resistance between device and heatsink SKN types have the Anode connected to the stud body SKR types have the Cathode connected to the stud body

SEMIPACK? SKKE Series Single Diode Modules Heavy-duty single diode modules in a variety of voltage and current ratings. These compact devices are suitable for high-current rectifier applications. Excellent heat transfer through aluminium oxide ceramic isolated metal baseplate Precious metal contacts for high reliability Approvals UL recognized E63532

SKYPER? 12 Press-fit IGBT Driver Module The Semikron SKYPER? 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V. For suitable IGBT modules see 122-0385 to 122-0387 ? Fits to 1200V & 1700V IGBT modules ? Drives Econodual and SEMIX press-fit modules ? Two 1W output channels for half-bridge applications ? Up to 8 μC gate charge output capacity ? Qualified safe operating area ensures best possible performance ? High reliability with MTBF rate > 5 Million hours ? Short-circuit protected over the complete operating temperature range ? Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off ? Robust rectangle signal tra

SKYPER? 42 R IGBT Adaptor Board The Board 2 generic SKYPER 42 R is an adaptor board for SKYPER IGBT drivers (e.g. RS 905-6175) in bridge circuits for industrial applications. The adaptor board can be used with one IGBT module, or with two in parallel. The board can be customized allowing adaptation and optimization to the IGBT modules i.e. SEMITRANS? Low inductance packages, or SEMiX? (solder pin version) flat packages. The switching characteristics of the IGBT can be influenced by user adaptation of the Gate Resistors to change the turn-on and turn-off speed. Furthermore, it is possible to adjust the monitoring level and blanking time for the DSCP (Dynamic Short Circuit Protection). Two output channels adjustable in single or dual mode Collector-Emitter voltage 1700V Output peak current 30A Half-bridge switching circuit Dynamic Short Circuit Protection Collector Series Resistance Adaptation Gate Resistors Boost Capacitors

SKYPER? IGBT Driver Core Module The SKYPER 42 R IGBT driver core constitutes an interface between IGBT modules and the controller. This core is a half-bridge driver with the basic functions built-in for driving, potential separation and protection. The SKYPER 42 R was developed for systems in the power range of 1 to 8 MVA. When using Semikron IGBT driver cores an adapter board (RS 905-6059) is required between the IGBT module and the gate driver core. Two output channels Up to 50μC (micro Coulomb) gate charge Integrated potential-free power supply Short Pulse Suppression (SPS) Under Voltage Protection (UVP) Drive interlock (dead time) top / bottom (DT) Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct switch-off Shut Down Input (SDI) Failure Management Expandable by External Boost Capacitors (BC) DC bus voltage up to 1200V SKYPER 42 R can be plugged or soldered on the SKYPER? IGBT adaptor board

Phase Angle Trigger Module, SKPC 100 series SCR trigger modules for use in zero voltage (SKPC 100Z), or instantaneous (SKPC 100) applications. Uses a hard firing technique to eliminate the need for an external transformer. Triggers SCRs in dc bridge configurations Polarised Faston connectors Mounting centres identical to SCR modules Operating supply voltage Nom.+10%,-20% Operating frequency 45-450Hz Input logic trigger voltage current 4-32V/10-30mA max. Non trigger input voltage 1.5V typ. 2.0V max. Critical Dv/Dt 500V/ms min. for 240V type 100V/ms min. for 440V type Peak gate output current 1.7A@ 90°C conduction angle rms gate current 100mA max. Zero voltage crossing 35V max. for SKPC100Z-240 Inhibit voltage 70V max. for SKPC100Z-440 Input/output isolation 2.5kV r.m.s. Standards UL 94-V0

IGBT MODULE, SIX, 1.2KV, 33A, Transistor Polarity:Six NPN, DC Collector Current:33A, Collector Emitter Saturation Voltage Vce(on):1.85V, Power Dissipation Pd:-, Collector Emitter Voltage V(br)ceo:1.2kV, No. of Pins:-, Product Range:-, RoHS Compliant: Yes

SKYPER? 12 Press-fit IGBT Driver Module The Semikron SKYPER? 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V. For suitable IGBT modules see 122-0385 to 122-0387 ? Fits to 1200V & 1700V IGBT modules ? Drives Econodual and SEMIX press-fit modules ? Two 1W output channels for half-bridge applications ? Up to 8 μC gate charge output capacity ? Qualified safe operating area ensures best possible performance ? High reliability with MTBF rate > 5 Million hours ? Short-circuit protected over the complete operating temperature range ? Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off ? Robust rectangle signal tra

Stud Mounting Rectifier Diodes High current rectifier diodes from Semikron housed in standard stud-mounting cases. Due to the excellent thermal coupling between the device and heatsink stud mounting offers high reliability at high operating currents. With voltage ratings of up to 1700 V these diodes are suitable for most high power rectification applications. Both Stud Anode and Stud Cathode diode configurations are available. High voltage and current ratings Robust high-reliability hermetically sealed case Low thermal resistance between device and heatsink SKN types have the Anode connected to the stud body SKR types have the Cathode connected to the stud body

SKYPER? 32 R & SKYPER? 32PRO R IGBT Module Adaptor Boards The Semikron Board 1 SKYPER? 32 R is an adaptor board for the IGBT driver module allowing customisation to suit the specific IGBT output module used. The switching characteristics of the IGBTs can be influenced through user selection of the appropriate RGon and RGoff components and it is also possible to adjust the monitoring level and blanking time for the Dynamic Short Circuit Protection function. The SKYPER? 32PRO R includes facilities for soft turn-off and an external error input. 122-0388 Board 1 SKYPER? 32 R is intended for use with driver module 687-5043 122-0389 Board 1 SKYPER? 32PRO R is intended for use with driver module 687-5049 ? Two output channels ? Failure management ? Collector-emitter voltage 1700V ? Peak output current 15A ? Dynamic short circuit protection